Mychron Replacement Bracket #552.

These fit;
Birel / Freeline, Kart Republic & Mad Croc, Honda classes plus Synergy, Project One, Zip, MS kart & a few other low production chassis.

PLEASE NOTE; (OTK style due before Xmas...will advise).

- These are a straight replacement of your existing Stainless Steel unit and bolt in the same way with the same hardware.

- These are also made from #5056 Alloy, which is a lot more forgiving during usage.

- There is 3 extra holes to adjust the Mychron height. The bottom of these 3 holes is the 'Standard' location hole. The second and third are in 10mm incriments.

- We also sliced off some of the excess metal around the mounting base area, which was only extra baggage.

- There is an oval on the middle bend/panel. This is actually a 'bend point'. As these are taller to suit a small or large driver for the Mychron to be seen, you can SLOWLY bend the bracket if you need it closer to the steering wheel or further away.

- Some organizations do not let you have the Mychron in front of the wheel etc etc. Luckily these can mount either front or back of the steering wheel.

- Immense weight saving. The standard Stainless Steel bracket weighs in at 104.78 while the Flash unit weighs 48.99 which is a saving of 55.79g.

- The 3 FLASH Alloy pieces (#550-#551-#552) in the standard style from the factory weigh 449.85. The 3 FLASH Alloy units weight 196.36. That is a combined saving of 253.49grams.

Lose a 1/4 of a Kilo for $55........with all 3 brackets!

AGAIN....check your Racing Organization if these are legal to use.....

CC - 736 - A

*** For Overseas Shipping, up to 500 grams is covered at $25.00 in an Australian Post Satchel. Over that weight, we have a GREAT deal with Interparcel who freight the World Over. Can get a quote for you no problem. ***

GENUINE Kart Shop Resellers inquiries welcome.