FLASH SALE! 2 x Steering Shaft Socket #515

This socket has been designed to fit up inside the steering shaft to make changing the shafts much easier between races or at home.

Weight per unit for mail 35 grams.

It has provision for a 13mm nut inside the tube up inside the steering shaft..

They are drilled right through for the steering shaft thread to pass right through the socket.

The splined area for the 13mm nut is right up to the very end internally of the socket.

To possibly fit your kart (as nearly every brand-style of kart is different), these are solid so if needed, you can machine/linish a bit off either end to comfortably slide inside the steering shaft while the floor is STILL on your kart....no need to drill a hole in the floor for access anymore.

After sliding the socket inside the shaft onto the internal 13mm nylon nut, just tighten or undo with a 13mm wrench on the hex end of the socket.

Part no; 515