Titanium Kart Packs. #ABCx1

3 combined sets of FLASH Shop Titanium kits A-B-C will just about cater to any kart....

On sale till 1st May.

We have Kit A and B and C listed separately on our site, this just makes it easier to order all 3 kits in one and you save a few bucks.

Kit A (center area) contains the following:
6mm x 1 x 20mm Countersunk suit Steering Hub x 3.
6mm x 1 x 20mm Allen Head suit Nasser Mounts x 4
6mm x 1 x 35mm Allen Head suit Hub-Steering Shaft x 1
6mm x 1 x 35mm Allen Head suit Side Pods x 4
8mm x 1.25 x 70mm Allen Head suit Column Chassis x 1
6mm non Flanged Nylon Nuts x 12
8mm non Flanged Nylon Nut x 1

Kit B (rear area) contains the following:
8mm x 1.25 x 25mm Hex Head suit Axle Cage/Cassette x 8
8mm x 1.25 x 95mm Allen Head suit front spindles x 2
8mm x 1.25 x 35mm Allen Head suit Rear Hubs x 2
8mm x 1.25 x 25mm Cap Screw suit Rear Bumpers x 8
8mm Non Flanged Nylon Nuts x 10

Kit C (frontal area) contains the following:
6mm x 1 x 35mm x Allen Head suit Side Pods x 4
6mm x 1 x 30mm x Allen Head suit Front Crash x 2
6mm x 1 x 25mm Cap Screw suit Floor Pan x 6
8mm x 1.25 x 35mm x Cap Screw suit Steering arms x 4
6mm NON Flanged Nylon Nuts x 12
8mm NON Flanged Nylon Nuts x 4

TC4 - GR5 if the Titanium used.

**** If you haven't used Titanium/Nylon before, the nylon part is the weakest part of the whole unit. Possibly put something like Never-Seize or similar on the bolt to ease through the nylon. They can pop out, tighten slowly.

***These measurements were taken of an OTK Kart....please check your bolt lengths on your kart as they do differ through out A LOT! THE ONUS IS ON YOU.

WARNING; Some racing organizations DO NOT allow Titanium, so please check your circumstances before purchasing. NO RETURNS!

Any questions, just give me a holler on 0401 2666 06.